2
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
DO NOT OVERLOAD:
These stilts are designed to support a maximum load of 225 lb (102 kg).
FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
READ BEFORE BEGINNING ASSEMBLY.
OPERATION AND SAFETY
1.
The operator must read and understand all
instructions before using.
2.
Do not use this equipment if you are in poor health,
taking medications, drugs, or have been consuming
alcohol, all of which may impair your ability to work
safely on this product.
3.
Always use these stilts in conformity with local or
national legislation which applies.
4.
Inspect before use. Do not use if damaged or parts
are missing. Replace any damaged or excessively worn
components before using the stilts. Stilts must be
maintained and cleaned daily.
5.
Stilts must not be modified. Never make temporary
repairs of damaged or missing parts.
6.
Examine thoroughly to make sure stilts are properly
set up.
7.
Stilts must be assembled and adjusted properly
following this manual.
8.
Fasten the calf strap first when putting on stilts.
9.
Keep all strap tightness comfortable, always fastened
and secure. Over-tightening can cause loss of
circulation and numbness in legs.
10.
Do not wear stilts without having had pertinent
instruction on how to wear and use them. Make sure
stilts are comfortable and adjusted properly. Practice
using Stilts with a handhold or wall close-by to break
or prevent falls.
11.
Stilts must be removed to make adjustments.
12.
Work area must be free of debris, clear of any
obstructions and level.
13.
Only use on a hard surface and level floor.
14.
Always be careful when working around furniture,
fixtures, pipes, rails and grates.
15.
Never work close to open stairs, doors, windows, floor
openings or other hazards.
16.
Always cover or block floor openings, staircases
and drop-offs.
17.
Avoid walking on oily, wet or otherwise slippery
surfaces.
18.
Always think about safety and use extreme care
when using stilts.
19.
Always look ahead before you step. Always warn fellow
workers of your movements.
20.
Take short, firm steps, making sure that the Stilts is
raised clear of the floor at each step. Do not drag
Stilts as you move or walk.
21.
Avoid working over other workers or their equipment
while on Stilts.
22.
Walk forward only. Never walk backwards.
Make a “U-turn” to change direction.
23.
Never walk on raised surfaces, for example, planks,
scaffolding, ladders or stand on benches or stools, etc.
24.
Do not climb or descend stairway while wearing Stilts.
25.
Ask for other workers assistance when retrieving
objects from the floor.
26.
Disconnect upper leg strap last when removing Stilts.
27.
This product is not intended or designed
for entertainment purposes.
OPERATIONAL SAFETY
FRANÇAIS
ESP
AÑOL
ENGLISH
