background image

Gerätedokument  /  equipment LoGbook  /  Livret d'appareiL  /  verbaLe d'instaLLazione

Gerätedokument  /  equipment LoGbook  /  Livret d'appareiL  /  verbaLe d'instaLLazione

iv

Allgemeine Geschäftsbedingungen

Es gelten die allgemeinen Geschäftsbedingungen. Die Garantie umfasst 
sämtliche Materialfehler, welche die Funktion des Geräts mehr als nur 
geringfügig beeinträchtigen. Von der Garantiepflicht ausgenommen 
sind Schäden, die durch falsche oder unsachgemäße Handhabung 
sowie normalen Verschleiß entstehen. Defekte Teile werden repariert 
oder bei Notwendigkeit durch Neuteile ersetzt. Die Garantie bezieht sich 
zudem nicht auf den Austausch des Amalgam-Sammelbehälters sowie 
nicht auf leicht zerbrechliche Teile wie Glas, Kunststoff oder Glühlampen. 
Vorgeschriebene Wartungsintervalle sind verbindlich einzuhalten. 
Der Hersteller behält sich das Recht vor, das Gerätedokument zur 
Überprüfung von Wartungsintervallen anzufordern.
Um die Gültigkeit der Garantie festzusetzen, ist nach ordnungsgemäßer 
Montage die dem Gerät beigefügte Montagemeldung unverzüglich 
an METASYS zu retournieren. In diesem Fall beginnt die Garantiefrist 
mit Inbetriebnahme. Bei Einbau ohne Montagemeldung an METASYS 
erlischt jeglicher Garantieanspruch. Einbau und Einsendung der 
Montagemeldung müssen innerhalb von 24 Monaten erfolgen, und zwar 
ab Datum des Verkaufs durch METASYS.
Es sei darauf hingewiesen, dass Garantieansprüche bei Amalgam-
abscheidern und zentralen Saugsystemen nur bei vorgeschriebener 
Verwendung des METASYS Absaugdesinfektions- und -reinigungsmit-
tels GREEN&CLEAN M2, sowie beim Wasserentkeimungsgerät WEK bei 
ausnahmsloser Verwendung des METASYS Entkeimungspräparates 
GREEN&CLEAN WK geltend gemacht werden können. Dasselbe gilt für 
das Hygienesystem H1, für welches nur das METASYS GREEN&CLEAN H1 
verwendet werden darf. Gesetzliche Gewährleistungsansprüche bleiben 
davon unberührt.
Garantieansprüche bei Kompressoren können nur bei Nachweis der 
Durchführung des jährlichen Austausch der Filterpatronen sowie, falls 
zutreffend, der Durchführung des 3.000 Stunden-Services geltend 
gemacht werden.

Terms and conditions

METASYS delivers exclusively on the basis of the present terms and 
conditions. The guarantee comprises all material faults that more 
than negligibly influence the function of the device. Excluded from 
the guarantee are damages that arise through incorrect or improper 
handling as well as normal wear. Faulty parts will be repaired or as 
necessary replaced by new parts. Furthermore, the guarantee does 
not apply to the replacement of the amalgam collection container or to 
fragile parts such as glass, plastic or light bulbs. Prescribed maintenance 
intervals are obligatory. The manufacturer reserves the right to request 
the equipment logbook to validate the maintanence intervals. 

In order to determine the validity of the guarantee, the notification 
of assembly accompanying the device must be sent to METASYS 
immediately after proper assembly has taken place. In this case the 
guarantee period begins with commissioning. In case of installation 
without notification of assembly to METASYS, any warranty claim is 
forfeited. Installation and return of installation proof must be completed 
within 24 months after date of sale from METASYS.

We point out that guarantee claims for amalgam separators and central 
suction systems can only be asserted if the device has been treated with 
the suction system disinfectant METASYS’ GREEN&CLEAN M2 according 
to the directions of use. In case of water decontamination system 
WEK, the unexceptional use of the water decontamination preparation 
METASYS’ GREEN&CLEAN WK is essential for the validity of a guarantee 
claim. This regulation does also apply to the hygiene system H1, which 
must exclusively be operated with GREEN&CLEAN H1. Implied warranty 
remains unaffected of this.

Warranty claims for compressors can only be granted upon presentation 
of proof that the yearly exchange of filter cartridges and, if applicable, 
the service after 3.000 hours have been performed.

Conditions générales de vente

La garantie s’étend sur toutes les demandes résultant d’un défaut 
de fabrication affectant la fonctionnalité de l’appareil. La garantie ne 
s’applique pas à des défauts résultant d’une utilisation inappropriée, 
aux pièces d’usure, ni aux pièces fragiles (verre, plastique ou ampoules) 
ou à l’échange du récipient de collecte. La pièce défectueuse sera 
réparée ou remplacée par une neuve. L’intervalle des maintenances 
programmées doit être obligatoirement respectée. En cas d’une 
demande de garantie, le fabricant se réserve le droit de demander le 
livret de l’appareil avec les dates des maintenances effectuées.

La garantie débute à la date d‘installation. Afin d’arrêter la validité de 
celle-ci le coupon de garantie dûment complété doit nous être retourné. 
La garantie expire si le coupon de garantie n‘a pas été renvoyé chez 
METASYS. L‘installation et le retour du coupon de garantie doivent se 
faire dans un délai maximum de 24 mois, la date de facture faisant foi.

METASYS ne donnera suite aux demandes de garantie que si le produit 
de nettoyage et de désinfection pour l’aspiration GREEN&CLEAN M2 
est utilisé comme préconisé pour les récupérateurs d’amalgame et 
les aspirations centralisées, le produit GREEN&CLEAN WK pour le 
système de décontamination d’eau WEK et le GREEN&CLEAN H1 pour le 
système d’hygiène H1. Les obligations légales de garantie ne sont pas 
concernées par cette clause.

Toute revendication éventuelle à la garantie est subordonnée au strict 
respect de l‘échange annuel des filtres ainsi que, le cas échéant, à la 
réalisation de la révision des 3000 heures .

Condizioni generali di vendita

Sono validi le condizioni generali di vendita. La garanzia copre tutti 
i difetti materiali che pregiudicano notevolmente il funzionamento 
dell‘apparecchio. Sono esclusi dall‘obbligo di garanzia i danni dovuti 
ad un uso errato od incorretto e all‘usura normale. Pezzi rotti vengono 
riparati o sostituiti con pezzi nuovi se c‘è necessità. Inoltre la garanzia 
non copre la sostituzione del barattolo d’amalgama né di pezzi fragili 
quali vetro, plastica o lampadine. È necessario osservare i termini di 
manutenzione prescritti. Il produttore si riserva il diritto di esigere il 
documento accompagnatorio d‘apparecchiatura, per la verifica degli 
intervalli di manutenzione. 

Perché la validità della garanzia possa essere accertata, dopo il 
montaggio conforme è necessario rendere immediatamente a METASYS 
l‘avviso l‘installazione consegnato con l‘apparecchio. In questo caso, 
la durata di validità della garanzia ha inizio con la messa in servizio. Il 
mancato invio dell‘avviso d‘installazione a METASYS dopo l‘installazione 
comporta l‘estinzione del diritto di garanzia. Montaggio ed invio 
dell‘aviso del montagio eseguito devono avvenire entro 24 mesi dalla 
data di vendita da 

D

ental

 eCO S

erviCe

 

Srl

.

SI fa presente che potranno essere fatti valere i diritti alla garanzia 
sole se con i separatori d‘amalgama e i sistemi d‘aspirazione viene 
utilizzato il prodotto METASYS di disinfezione e pulizia per l‘aspirazione 
GREEN&CLEAN M2, così come se, con il sistema di decontaminzione 
dell’acqua WEK, verrà utilizzato esclusivamente il preparato METASYS 
per la decontaminazione GREEN&CLEAN WK. Lo stesso vale per il sistema 
d’igiene H1, per il quale è permesso l’utilizzo del solo GREEN&CLEAN H1. 
Di questo rimangono intangibili i legali diritti di garanzia di assenza di 
vizi del prodotto consegnato. 

Si possono far valere diritti di garanzia solo in caso di dimostrazione di 
manutenzioni annuali avvenute per il ricambio dei filtri e, se applicabile, 
l‘effettuazione della manutenzione delle „3000 ore“.

D

GB

I

F

Seite / Page / Page / Pagina

Summary of Contents for META Air

























Reviews: