6
EN |
Preparation for use
5. Preparation for use
5.1.
Installation requirements
> When using the device as a soap dispenser, install the dispenser above or as close as possible to the sink to prevent
liquid dripping from your hands onto the floor.
> Required space above the dispenser: 50-70 mm for the lever as well as for attaching and removing the dispenser, and
an additional 100 mm for operation.
> Required space below the dispenser for bottle removal: approx. 170 mm
>
Ergonomically optimal installation height: 130–135 cm, measured from the floor to the top edge of the dispenser
housing.
5.2.
Assembly
1
First remove the bottle: Tilt the bottom of the inserted bottle slightly for-
wards and remove the bottle from the dispenser.
2
Remove the dispenser from the wall plate: Press the latch on the wallpla-
te and slide the dispenser up and out.
