DESCRIPTION OF PARTS
CARACTERISTIQUES TECHNIQUES
Voltage / Frequency
230V~50Hz
Input power
1400W
Speed
4500 min
-1
Carbide metal saw blade
210x30mm
Cutting angle
0°-45°
Weight
5,9Kg
Noise emission values measured according to relevant standard.
Acoustic pressure level
LpA 97.7 dB(A) K = 3 dB(A)
Acoustic power level
LwA 110.7 dB(A) K = 3 dB(A)
ATTENTION !
The sound power pressure
may exceed 85 dB(A), in this
case individual hearing
protection must be worn.
Weighted root mean square acceleration according to relevant standard. :
< 2.5 m/s ²
K = 1.5 m/s²
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another that the declared vibration total value may
also be used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used and of the need to identify safety
measures to protect the operator that are based on an estimation of exposure in the actual conditions of
use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
1. base
2. center cover
3. handle with switch
4. safe cover
5. guide plate/fence
6. turnable table
7. laser
8. moveable guide fence (alternative)
Summary of Contents for 5411074127695
Page 3: ...3 Changement de lame Blade veranderingen Blade change ...
Page 40: ...1 ...