45
VIBRATION SAFETY
This tool vibrates during use. Repeated or
long-term exposure to vibration may cause
temporary or permanent physical injury,
particularly to the hands, arms and shoulders.
To reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or
for an extended period should first be
examined by a doctor and then have
regular medical check_ups to ensure
medical problems are not being caused or
worsened from use. Pregnant women or
people who have impaired blood circulation
to the hand, past hand injuries, nervous
system disorders, diabetes, or Raynaud’s
Disease should not use this tool. If you
feel any medical or physical symptoms
related to vibration (such as tingling,
numbness, and white or blue fingers), seek
medical advice as soon as possible.
2. Do not smoke during use.
Nicotine reduces the blood supply to the
hands and fingers, increasing the risk of
vibration-related injury.
3. Use tools with the lowest vibration when
there is a choice between different
processes.
4. Include vibration-free periods each day of
work.
5. Grip tool as lightly as possible (while still
keeping safe control of it).
Let the tool do the work.
6. To reduce vibration, maintain the tool as
explained in this manual.
If any abnormal vibration occurs, stop use
immediately.
ELECTRICAL SAFETY
Always check that the
power
supply corresponds to the
voltage on the rating plate.
DESCRIPTION
Your cut-off machine has been designed for
sawing wood and wood products.
1 On/off switch
2 Transport handgrip
3 Lock knob bevel angle
4 Head lock down knob
5 Lock knob mitre angle
6 Guide fence
7 Mounting hole
8 Scale for mitre angle
9 Dust extraction connector
10 Operating handgrip
11 Saw blade
12 Saw slot
13 Table top
14 Lock knob for vice
15 Mounting hole for vice
16 Lock knob slide mechanism
17 Bracket extension
Mounting the machine
The machine must be screwed to a workbench.
Mark the position of the mounting holes (7) on
the workbench.
Drill holes at each of the marked positions,
adjusting the diameter and depth of the holes to
the screws used.
Place the machine on the workbench and
insert the screws into the mounting holes.
Firmly tighten the screws.
