30
GB
CUT-OFF MACHINE
APPLIANCE
The mitre saw is designed to crosscut wood and
plastic commensurate with the machine’s size.
The machine is not to be used for cutting fire wood.
It is not designed for commercial use.
General safety instructions.
"WARNING!
When using electric tools always comply with the
basic safety instructions to reduce the risk of fire,
electric shock and injury to persons, including the
instructions below. Read all the instructions before
using this product and retain the information".
Operation in complete safety
1 - Keep the work zone clean.
- Disorderly zones and workbenches are likely to
cause accidents.
2 - Consider the work zone environment.
- Do not expose tools to rain.
- Do not use tools in wet or damp environments.
- Keep the work zone well lit.
- Do not use tools in the presence of inflammable
liquids or gases.
3 - Protection against electric shocks.
- Avoid any bodily contact with surfaces that are
earthed or connected to earth (for example pipes,
radiators, cookers, refrigerators).
4 - Keep other people away.
- Do not let people, particularly children, who are not
involved in the work in progress touch the tool or the
extension lead, and keep them away from the work
zone.
5 - Store tools not in use.
- When they are not in use tools should be stored in
a dry, closed place outside the reach of children.
6 - Do not force the tool.
- It will work best and most safely at the speed for
which it has been designed.
7 - Use the correct tool.
- Do not force small tools to make them do the work
of an industrial tool.
- Do not use tools for purposes for which they are
not intended, for example, do not use Circular Saws
to cut tree branches or wood logs.
8 - Wear appropriate clothing.
- Do not wear loose clothing or jewels, because they
can be caught in the moving parts.
- Wearing non slip shoes is recommended for
outside work.
- Wear hair protection intended to contain long hair.
9 - Use protective equipment.
- Use safety glasses.
- Use a normal or dust mask if the working
operations generate dust.
10- Connect the dust extraction equipment.
- If the tool has provision for the connection of dust
extraction and collection equipment, check that it is
connected and used correctly.
11 - Do not use the cable/lead in poor
conditions.
- Never jerk the cable/lead to disconnect it from the
electric socket.
- Keep the cable/lead away from heat, all lubricant
and all sharp edges.
