19
A01-00055 Rev M
Windows and Linux, http://connectivity.powervar.com/products/
mopups-pro/
SCENARIO B:
Shutdown more than one computer sharing the UPM
output power, or in applications where any computers are more than 6
feet from the UPM.
• Purchase the optional ManageUPS Net adapter (SNMP/WEB card,
PN: AM-P1-R2), install it in the Extended Communications Slot
of the UPM and connect it to the TCP/IP LAN that the computers
are connected to. Information & User Guide for ManageUPS Net
Adapter can be found at this link: http://connectivity.powervar.com/
products/manageups.asp
• Purchase a license(s) for the software MopUPS NSA (Network
Shutdown Agent), download NSA and install it on each computer
that you want to shutdown. User Guide and Install Packages for
NSA can be found at this link: http://connectivity.powervar.com/
products/mopups-nsa/
• Use the Network Shutdown Controller menu in the WEB interface
of the ManageUPS Net Adapter to configure power events and
delays you want to trigger NSA to initiate shut down on each host
OS.
SCENARIO C:
Automatic shutdown of one or more computers powered
by the UPM, based some event other than AC power failure i.e.
environment over temperature or other external event.
• Use the same options and method described above for Scenario
B, but choose the ManageUPS Net adapter with environmental
sensor included. (PN: AME-P1-R2). http://connectivity.powervar.
com/products/manageups-pe/
SCENARIO D:
Automatic shutdown of legacy or proprietary engineered
system designed to interface with UPM status information presented as
relay contact closures or active High/Low 12V signals.
