blue’Log X series
35| 52
7.13.2
Set up new system using master data
A new system can be set up using the system master data and your portal access
data. The system configuration can be finalized in the portal. To set up a system,
the following portal access data are necessary:
Portal user name
Portal password
Assignment to the data logger via the portal is also possible at a later date.
7.14
Portal communication
In the menue „Online-Portal“
„Communication“ the interval can be specified, in
whitch the data logger should report to the online portal.
1.
Navigate to the "PV system" area via the top navigation bar.
2.
Navigate to the "Online portal" area via the left-hand navigation menu and select
"Communication".
With the appropriate radio button you can select if your blue'Log should report and
transfer the collected data at regular intervals or at specified times to the online
portal.
7.14.1
Regular report intervals
Specify blue’Log report intervals to the portal at every five, 15 or 60 minutes.
A specific time window for transfer can be specified by entering a start and end
time, during which the selected report interval (five, 15 or 60 minutes) will apply.
7.14.2
Predefined report intervals
Specify defined times (full hours) for transfer of reports from the blue’Log data
logger to the portal.
A maximum of 24 report times (full-hour) can be selected.
Summary of Contents for blue'Log X Series
Page 1: ...blue Log X series X 1000 X 3000 Operating manual Version 20150201...
Page 54: ...52 52 blue Log X series...
Page 55: ......
