blue’Log X series
37| 52
8.
Recording of devices
8.1
Sensors
1.
Navigate to the "Devices" area via the top navigation bar.
2.
Navigate to the "Sensors" area via the left-hand navigation menu.
Fig. 20: Device websites: Add new sensor
3.
Via the drop-down menu, select the sensor model connected to the input of the
blue’Log data logger (e.g. Si020TC-K). Further selections will be made available in
the entry menu.
4.
If the sensor to be connected is not included in the list, it can be added by selecting
a generic template with a subsequent manual configuration of the template. Please
check in the data sheet whether the sensor is compatible.
5.
Enter a distinct “sensor name” for easy identification of each recorded sensor.
6.
Via the drop-down menu, select one of the four ports (MI-1 to 4) to which the
sensor is connected. If the blue’Log basic device was expanded by a multi I/O MX
module, further ports will be available in this selection.
Summary of Contents for blue'Log X Series
Page 1: ...blue Log X series X 1000 X 3000 Operating manual Version 20150201...
Page 54: ...52 52 blue Log X series...
Page 55: ......
