34| 52
blue’Log X series
7.12
Basic-data
In the menue „PV-Plant“
„Basic-Data“ informations of the PV-Plant can be saved.
The information is used for documentation and may be taken into account and
transferred during portal registration.
1.
Navigate to the "PV system" area via the top navigation bar.
2.
Navigate to the "Master data" area via the left-hand navigation menu.
3.
Enter the following system-specific data in the input boxes:
System/project description
Total installed power
Orientation
Inclination
Installation country
Longitude / latitude
7.13
Portal registration
1.
Navigate to the "PV system" area via the top navigation bar.
2.
Navigate to the "Online portal" area via the left-hand navigation menu and select
"Registration".
Select (via a radio button) either registering your blue’Log data logger with an
existing system or registering it with new master data.
7.13.1
Assignment to an existing system
If the system is already set up in the portal, the data logger can be assigned to the
existing system here. You will need the following:
Five-character system ID
Portal user name
Portal password
Alternatively, assignment via the hardware serial number of the data logger is
possible in the portal.
Summary of Contents for blue'Log X Series
Page 1: ...blue Log X series X 1000 X 3000 Operating manual Version 20150201...
Page 54: ...52 52 blue Log X series...
Page 55: ......
