6
Welcome to the Setup Wizard
At the first login on the blue’Log you configure the “Security and privacy settings”
and in addition to that you have the option to choose the Setup Wizard which will
then hep you set up the device step by step.
The wizard can be closed and launched again at any time.
Support Access
The “Support Access” is deactivated in the factory settings. If you don’t activate the
access, meteocontrol is not able to connect to the device in case of service.
You can change the setting at any time in the menu “System – User”.
Firmware update and time zone
When using the device for the first time, you should check whether
•
a new firmware update is available
•
the correct time zone is set.
The wizard will automatically guide you through these settings. If you are not using
the wizard, navigate as follows
1.
Firmware update
“System – Update*” menu
2.
Time zone
“System – Date & Time” menu
*When the firmware is updated, the “driver package” will automatically be updated
at the same time.
