blue’Log X series
35 | 120
7.9
Logger master data
The data logger basic or master data are shown in the "Master data" menu or can be
changed here. To get to the "Master data" menu, perform the following steps:
1.
Navigate to the "PV system" area via the top navigation bar and then click on
"Master data".
The following information can be configured:
Photovoltaic system
System / project name
(Name describing your system)
Total installed power
(Total installed power P of your system)
Agreed connection power P
AV
(The connection power of your system agreed with the grid operator)
AC nominal voltage U
Nom
(Nominal voltage of your system)
Maximum apparent power S
AV
(Maximum possible apparent power S
AV
of your system)
Data loggers
Model (display only)
(of the blue’Log, e.g. X
-1000)
Serial number (display only)
(of the blue’Log, 79810X XXXX XXXX)
System ID (display only)
(allocated by the portal, five digits)
Data logger name
(Name describing your blue’Log in order to be able to identify the data
logger clearly)
Data recording interval
(interval at which the measurement data are recorded in the database.
Five-minute and 15-minute values can be saved. 15-minute values are
recommended for the longest possible archiving period.)
