blue’Log X series
47 | 120
10.2
Adding meters
10.2.1
S0 meter
1.
Navigate to the "Devices" area via the top navigation bar.
2.
Navigate to the "Meters" area via the left-hand navigation menu.
Fig. 30: Device websites: Adding a new S0 meter
3.
Via the drop-down menu, select S0 energy meter. After selection the configuration
menu expands with further settings.
4.
If the meter to be connected is not included in the list, you can select a generic
template and configure the meter manually. Please check in the data sheet
whether the meter is compatible.
5.
Choose a "device name" which clearly identifies the meter.
6.
Via the drop-down menu, select one of the eight ports (MI-1 to 4, DI-1 to 4) to
which you have connected the meter. If you have expanded your blue’Log basic
device using a multi I/O MX module, further ports will be available.
7.
The following suggested parameters can be carried over unchanged:
Unit
Pulse constant
