meteocontrol Power Control 03082012 - en
37/78
Digital output
Feedback output
Active power procedure via analogue input
Input field
Meaning
The lowest measured value
Value pair for the definition of the lowest
working point (example: 4.5 mA corresponds
to zero per cent)
The highest measured value
Value pair for the definition of the highest
working point (example: 19.5 mA
corresponds to one hundred per cent)
Sensitivity
Sensitivity setting: indicates from when a
change to the analogue input results in a
change to the control value (indicated in %)
Issue current control value
Control value issue setting: indicates whether
the current input current is fed back on the
analogue current output
Capping the feed-in power
at P
AV
Limitation of the feed-in power to P
AV
7.1.3
P(DI) internal
With this procedure, the active power P is used as the control value.
The DI requirement is provided by the grid operator as a digital input signal,
e.g. digital ripple control receiver and connected to the internal digital inputs
DI of the WEB`log.
