IMPORTANT SAFETY INFORMATION.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
!
IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Before wiring to power supply and during
servicing or relamping, turn off power at fuse or circuit breaker. All servicing or relamping must be performed by qualified
service personnel. Product must be grounded to avoid potential electric shock or other potential hazard. Product must be at
locations and at heights and in a manner consistent with its intended use, and in compliance with Electrical Code and local
codes.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Junction Box Wiring
Secure the crossbar to the junction box (by others) designed to
support the weight of the fixture.
Lock the strain relief bushing to the power cord with allowance for
wiring connections, and thread the power cord through the
canopy wire hole.
Connect the Green ground conductor to the ground screw on the
crossbar, the line voltage to the Black conductor, and the neutral
to the White conductor. Please refer to the wiring diagram section
for more information of all wiring connections.
Thread the cable through the coupler with the terminal
side on top. Slide the coupler up to the canopy and
secure with the screw on crossbar.
Step 1
Step 2
Step 3
Step 4
Junction
Box
Ground Screw
Crossbar
Screw
Canopy
Terminal
Coupler
Cable
Strain Relief Bushing
1
2
3
4
Installation Instructions
Atria 10 - Adjustable Cable
ADVANCED HIGH CEILING
METEOR LIGHTING
P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com
*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 1
