DMX
5
6
7
8
Make electric connection inside the mounting bracket.
Step 7
Tighten four screws on the mounting bracket.
Step 8
Insert the cable through the gripper and plunger. Trim off extra cable using
cable cutting tool. To adjust the cable to desired length, press the plunger.
Step 5
Fasten Powerfeed tube and Nut. Secure gripper with Powerfeed tube,
then feed cord through Powerfeed tube.
Step 6
Installation Instructions
Atria 10 - Adjustable Cable
ADVANCED HIGH CEILING
METEOR LIGHTING
P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com
*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 3
