41
LP-80
5. Remove and discard old batteries.
6. Insert new batteries, following the indicators on the battery holders.
NOTE: Ensure batteries or oriented properly; placing them the wrong way can damage the LP-80.
7. Press the RESET button on the top left corner of the green circuit board.
8. Rotate the cover back into position.
9. Turn the LP-80 over, with the screen facing down.
10. Replace the four washers and screws into the back cover.
4.2.2 CLEANING THE PROBE AND CONTROLLER
The probe should always be clean to ensure accurate readings. To clean the probe, use a soft
cloth and a small amount of isopropyl alcohol. Rub the surface until it is clean.
To clean the controller, use a soft cloth and water to wash off heavy dirt, then use ethyl or
isopropyl alcohol to finish cleaning.
NOTE: Only use a soft cloth when cleaning the LCD window. Tissues made from wood fiber will scratch the window.
4.3 REPAIR
METER repairs manufacturer defects and instruments within the 1-year warranty at no
charge. Repairs outside the warranty window are charged based on cost of parts, labor, and
shipping. An extra fee may be charged for rush work. METER will provide an estimated repair
cost, if requested.
All LP-80 instruments returning to METER for servicing must be accompanied with a Return
Material Authorization (RMA) number. Prior to shipping the instrument, please contact
to obtain an RMA number.
1. Place the LP-80 in a plastic bag to avoid disfiguring marks from the packaging.
2. Do not ship any accessories.
3. Ship the LP-80 in its original case.
If the original packaging is not available, use a box that has at least 4 in of packing
material (e.g., SytrofoamTM peanuts or bubble wrap) between the instrument and each
wall of the box, ensuring the instrument is suspended in the packing material.
4. On the RMA form, please verify the ship to and bill to information, contact name, and
problem description. If anything is incorrect, please contact
.
5. Tape the box in both directions for added support.
6. Include the RMA number in the attention line on the shipping label.