13
LP-80
4. To return to the Data tab and leave stored data intact, press
ESC.
To erase data from memory, press
ENTER.
NOTE: This will delete all data permanently.
When the process is complete, the Data tab will reappear.
To erase all stored data using the LP-80 Utility:
1. Make sure the LP-80 is properly connected to the computer.
2. Click
Erase
in the lower left of the screen, or go to
File
>
Erase Data
.
A confirmation dialog box will appear.
3. Click
OK
to continue.
Click
Cancel
to return to the main screen.
A progress bar will appear on the main screen, indicating that data is being erased.