51
ATMOS 41W
Figure 29 Status lights
3.2.16 CELLULAR COMMUNICATIONS
The ATMOS 41W has a built-in cellular module for uploading measurement data to ZENTRA
Cloud. This allows for near real-time monitoring of the environment at the measurement site.
The ATMOS 41W powers the cellular module only long enough to upload the data collected
since the last time the instrument successfully reported. During these upload times, the
ATMOS 41W transfers data to ZENTRA Cloud, retrieves any pending settings changes, and
occasionally performs system updates to the instrument.
Upload session frequency and timing can be changed in ZENTRA Utility mobile
(
Section 2.2.2
) or ZENTRA Cloud. The default setting is for the ATMOS 41W to upload data
once per hour at a random time within each hour of the day. Less frequent uploads conserve
battery power.
NOTE: Contact
or a METER sales partner for more information if more frequent uploads are needed.
The ATMOS 41W is available with either a 3G or 4G LTE-M cellular communication module
and is configured to operate with more than 550 roaming partner networks in 190 countries.
Please contact
or a METER sales partner for more information on the
configuration that is best for the location where you plan to deploy the instrument.
