Metos CGN/GNF660L1, Installation And Operation Manual

8

1.11.2102

5. 

Cleaning and maintenace

Always disconnect the appliance from the mains before any cleaning  and maintenance.

The machine must not be cleaned with a pressure washer. Do not spray water direct on 

appliance. Avoid usin excess amounts of water. Water should not get in contact with electric 

components.

5.1 Cleaning

The need for cleaning highly depends on how frequently the appliance is used. Observe the 

use and schedule the cleaning as needed.

For cleaning the interior and exterior, use a neutral or slightly alkaline cleaning agent. It is 

recommended to occasionally clean the interior with a disinfectant. Impurities can usually be 

wiped off with a damp cloth. Removing the shelves helps cleaning the interior.

Never use metallic tools for clearing appliance.

Do not use corrosive cleaning agetns.

5.2  Routine maintenance

In normal use, this appliance requires little maintenance. The user can do the following pro-

cedures: 

• 

The condenser has to be cleaned regularly. Before cleaning, switch off the appliance with 

the main switch and unplug the cable from the power supply. Use either a vacuum cleaner 

or a soft brush. When brushing the condenser, be careful not to damage the aluminium 

grid of the condenser.

• 

Check that the door seal is in good condition. It is important that the seal is undamaged 

and perfectly closing.

• 

Check that the power cable that connects the appliance to the mains socket is not cut, 

cracked or altered in such a way as to compromise the insulation. Contact your authorised 

service centre if this requires maintenance..

5.3  Long shutdowns

If the appliance is inactive for long periods of time proceed as follows::

• 

Switch off the main switch.

• 

Disconnect the plug from the power supply socket.

• 

Remove all foods from the refrigerator and clean it, see ”Cleaning”.

• 

Leave the door ajar to avoid bad odours from forming.

• 

Protect the compressor group from dust.