Metos Econo BD-600W, Installation And Operation Manual

2

28.09.2012

Freezer Metos Econo BD-600W

1. General

Please read the introductions in this manual as it contains important information regarding 
proper, ef

fi

 cient and safe use and mainentance of the appliance. 

Keep this manual in a safe place for the eventual use by other operators of the applian-
ce.  

The installation of this appliance must be carried out in the accordance with the manufacturers 
instructions and following local regulations. 

Switch off the appliance in the case of failure or malfunction. 

Have the appliance serviced by a technically quali

fi

 ed person authorized by the manufacturer 

and using original spare parts.

Not complying with the above may jeopardize the safety of the appliance.

Before performing any cleaning or maintenance operation always turn off the appliance and 
unplug it from the power supply.

1.1 Intended use

The appliance shall only be used for storing food and beverages. The manufacturer is not 
responsible for the consequences if the appliance is used for other purposes..

Do not store food in direct contact with the structure.

Both the appliance’s construction features and the condensing unit’s capacity have been de-
signed to store only pre-cooled products. 

In all appliances there are surfaces subject to frosting. 

The appliance is to be defrosted 

manually when needed. 

Never attempt to remove frost using a pointed object because in this way you could irreparably 
damage the appliance.

Do not use any mechanical device or other arti

fi

 cial means to accelerate the defrost process.

The Manufacturer declines all responsibility, and the warranty shall be null and void, if electrical 
and/or mechanical alterations are made to the product.

1.2 Controls at reception

Unpack the appliance immediately on receipt to check that no pieces have been lost or damaged 
in transit.Inform the carrier of any damage at once.

1.3 Handling

HANDLING with FORK LIFT or SIMILAR

Before handling operations ensure that the lifting capacity is suf

fi

 cient for tha appliance in 

question. Begin lifting checking that the appliance is in stable equilibrium.

Do not tip or turnover the appliance during handling.

Wait at least 2 hours before turning on the appliance if it had to be transported horizontaly.