Part Number 4532287 Rev 5 12/15 45
Section 4
Maintenance
Daily Cleaning and Maintenance
GLASS CLEANING
NOTE: The cleaning of Ceran® glass is identical to cleaning
other similar glass surfaces. You may use any regular glass
cleaning products available from a hardware store.
You may use a razor blade scraper or a non-scratching
sponge to remove tough residues. When scraping, place
your razor blade scraper at an angle of about 20
o
to 30
o
from the glass. Then wipe clean the glass with a cleaning
product.
20
o
- 30
o
STAINLESS STEEL CASE
1. For any appliance with stainless steel case or rim, clean
the stainless steel surface using a soft cloth with a mild
detergent and/or a food-safe liquid cleaner designed to
clean stainless steel.
2. Wipe dry with a soft clean cloth.
VISUAL INSPECTION OF SILICONE SEAL
Inspect the silicone seal around the glass perimeter or the
joint between the appliance and the counter surface. Call
for service immediately if you notice:
• Cracks on the silicone seal.
• The silicone seal comes away from the glass/housing or
moves when you press down on the seal.
Weekly Cleaning and Maintenance
AIR INTAKE FILTERS
Notice
Inspect and Clean Fresh Air Intake Filter
We strongly recommend using air intake filters in all
installations to protect the equipment from grease
particles. A dirty, blocked air intake filter blocks the
air vent and can cause damages to the electronic
components. Inspect, clean or replace the air intake
filters at least once a week or as often as necessary.
Yearly Maintenance
Best Practice
: Have the induction appliance examined
once a year by an authorized technician.
