Metos KODIAK CR30, Operating Manual

10

d

isplay

of

mixer

data

Number of mains connections and control panel and frequency converter software version:

•  When the machine is connected to the mains, three values will be displayed in the text field on the panel:

• 

Number of times the machine has been connected, e.g. 

 for three times

•  Control panel software version; first 

 is displayed, then the version, e.g. 

 for version 26

•  Frequency converter software version; first 

 is displayed, then the version, e.g. 

 for version 18

Running time and error log

It is possible to display the time the machine has been on (the motor has been running):

• 

Hit emergency stop and press 

 next to 

.

• 

Time displayed in hours: 0 - 1 - 2 etc.

• 

Deactivate emergency stop to cancel the display.

It is possible to display a log of the errors that have occurred:

• 

Hit emergency stop and press 

 next to 

. 

•  The display shows the latest error first.

• 

To scroll back through the errors, press 

 next to 

; to scroll forward, press 

 next to 

.

• 

The last eight errors can be displayed.

• 

Deactivate emergency stop to cancel the display.

e

rror

Codes

and

possible

solUtions

:

For some errors, the control system will show an error code in the display:

  User pressed 

 without raising the bowl to working height.

Solution:

  Raise bowl to working height. 

  User pressed 

 without fitting the safety guard.

Solution: 

Fit the safety guard.

  The frequency converter has overheated.

Solution: 

The error will disappear when the temperature has dropped to an acceptable level.

Stop the mixer and reduce the quantity of ingredients in the bowl. When it starts again, select a lower speed

.

  There is an error in communication between the control panel and the frequency converter.

Solution:

  Call the engineer.

  Error in frequency converter.

Solution:  

Call the engineer.

  Thermal sensor in the frequency converter has cut out.

Solution:

  The error will disappear when the temperature has dropped to an acceptable level.

  Intermittent low voltage in the power supply.

Solution: 

The power supply to the mixer should be checked by an expert.

  Intermittent high voltage in the power supply. 

Solution: 

The power supply to the mixer should be checked by an expert.

  The mixer is overloaded because of excessively heavy dough etc.

Solution:

  Reduce the quantity in the bowl; the product may need to be reduced or thinned before the machine is restarted. 

When it starts again, select a lower speed.