Metos KODIAK CR30, Operating Manual

6

To raise leg = turn 

clockwise

To lower leg = turn 

anticlockwise

s

afety

:

The machine is designed for the manufacture of products that do not trigger any reactions or release sub-

stances that may be harmful to the user when in use.

Users must be over 14 years of age and trained in the use of the machine according to these instructions.

User safety is assured as follows:

• 

Tools can only rotate when the safety guard is in place and the bowl is lifted.

• 

The safety guard is made of plastic. It is not possible to attach the guard incorrectly.

• 

No access to rotating tools.

•  The spread of flour dust is inhibited.
• 

Equipped with emergency stop - The tool stops rotating in less than 4 seconds (also for normal shut-down and stop via 

safety guard).

•  Clearance between guard/stand and lifting handle at least 50 mm.
• 

Noise level under 70 dB.

• 

Machine remains stable on a slope of up to 10

o

.

The distance from the floor to the bowl arm should be adjusted as 

shown in the section on 

Adjustments, page 6.

The machine is protected against overvoltage.

The machine should be positioned to allow space for normal use and maintenance.

Good ergonomics for the user is ensured by the accompanying bowl trolley, which eliminates heavy lifting of the bowl and 

maintains the right working height.

The following recommendations apply to work with powdery ingredients:

• 

Powdery ingredients should not be poured into the bowl from a great height. 

•  Bags of e.g. flour should be opened at the bottom, down in the bowl.
• 

Do not run up to the maximum speed too quickly.

There is a risk of injury if the machine is not earthed.

It must be ensured that the cable used to connect the machine to the mains meets the standard for the country 

in which the machine is installed. See also 

‘Electrical Connection’

.

Placing your hands in the bowl while the machine is running may cause physical injury.

a

djUstments

:

When the mixer is delivered, the adjustable feet will 

be turned right to the bottom.

 The height of the legs 

should be adjusted

 so that the bowl on the bowl 

trolley fits perfectly into the bowl arms

.

If the floor is not level, the legs can be adjusted 

individually to ensure that installation is correct.

A 32 mm fixed or adjustable spanner should be 

used.