Metos KODIAK CR30, Operating Manual

8

Before starting the machine:

Place the bowl in the bowl trolley.

Put the desired tool into the bowl and wheel it into position 
between the bowl arms. Ensure that the bowl is correctly en-
gaged with the bowl arms; see 

Adjustments, page 6

.

Fit the safety guard and turn it so the filling hole is accessible 

when the machine is running. 

Turn the tool to lock it into the bayonet fitting.

Lift the bowl with the aid of the lifting handle. 

The mixer is now ready to start.

It is possible to set both the running time and speed before 
starting the machine; see next section:

Start the machine:

Press 

 to start the mixer.

Press 

 next to 

 to increase the speed.

Press 

 next to 

 to reduce the speed.

The speed is shown as a number on the scale 

.  

The display 

1

 represents the lowest speed, 

approx. 64 rpm.

The display 

12345678

 represents the highest speed, 

approx. 353 rpm.

Display of running time – hours:

Select a running time for the mixer by pressing 

 next to 

. The running time is shown in minutes and seconds in 

the timer field between 

 and 

.

Running times of up to 90 minutes are available.

The running time will not be reset if 

 is pressed once; press 

 once more and it will be reset.

If no running time is selected, the display will show the time 
elapsed since the mixer was started.

Inspection of ingredients while in use:

If the mixer needs to be stopped temporarily without affecting 
the running time, press 

. The mixer will slow down and 

then stop and the running time will stop too. 

The bowl can now be lowered and the ingredients checked.

Lift the bowl and press 

, and the mixer will start and the 

running time will resume. 

Stop the machine:

To stop the machine:

• 

Press 

. Running time not reset.

• 

Press 

 twice. Running time reset.

• 

Press the emergency stop - the running time will be reset.

• 

‘Tilt’ the safety guard - the running time will be reset.

• 

Lower the bowl - the running time will be reset.

In all cases the mixer can be restarted by pressing 

.

It will start at the lowest speed.

Resetting the timer:

The timer can be reset by pressing 

 and 

 next to 

 at the same time. If the timer is reset while the mixer is 

running, the machine will stop and beep.

o

peratinG

the

mixer

:

Emergency stop

Stop

Increase time

Timer (timer field)

Decrease time

Speed indi-

cator

Decrease speed

Increase speed

Start