1.The refrigerator should be located in a completely flat surface , Leave 5~10
cm between each side of the appliance and the wall,
and leave 30 cm between the top of the appliance and
the ceiling.
2.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity may
cause stain.
3.
Pulled out the bottom panel before installation.
4.The appliance can be adjusted by rolling its two
legs in front the bottom when it is unstable. Rolling
in clockwise can rise up the machine.
5.The location should be firm and flat. An
un-securely position may cause noise and libration:
(a)The noise may be increased if the
floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
6.Make sure the adjustable legs are clung to the floor, and set the appliance
slope backward slightly for keeping the doors closed tightly.
Warning:
Do not use any electronic equipment inside the appliance.
PLACEMENT OF FOOD
1.There should always be some space between
items inside for air circulation.
2.
kept in sealed package
becoming dry or with odour.
Food should be
to avoid
3.Hot food should be cooled down before placing
into the appliance. Otherwise, interior
temperature and electronic consumption
will increase.
4.Reduce the frequency of door opening can
efficiently low down the electronic consumption.
6
3
Warning:
Please get rid of the gasket of the door before the
disposal. The disposed apparatus should be handled by
professional staff, as it may be harmful to the environment.
1.Do not splash water on the refrigerator, as it will cause oxidation
and malfunction. Electronic component such as on/off button
should be wiped dryly.
2. Cleansers such as soap powder, abrasive cleaning powder, alkali
cleansers, chemical cloth, thinner, alcohol, acid petroleum product
and hot water should not be used to clean the refrigerator as they
may damage the painted cover and plastics.
3. Smear can damage the interior plastic component, so wipe it as soon
as possible.
4. Please check the points below after maintenance:
(1) Is there any damage or loss of the electronic wire ?
(2) Can the plug be put in the socket reliably and smoothly?
(3)Is the plug heating unconventionally?
USER NOTIFICATIONS
TROUBLE SHOOTING TIPS
7.Heavy frost occurs on the rear of the appliance
Putting humid or hot food into the appliance may cause this problem. Or
it may be caused by the heavy environment moisture.
1.
does not
It may not be connected to the power supply(plug, power cut or fuse);
Voltage is too low.
The refrigerator
work
2.The refrigerator does not work efficiently as expected
It may be caused by heavy frost, or by warm temperature setting,or by
frequently door operating.
3.It makes unusual noise
It may be caused by an imbalance or loose ground locating the appliance,
or by resonation between the appliance and other ambient objects.
4.The compressor keeps working for a long period
The environment temperature may be too high. The doors may be opened
frequently or even they are left open. The temperature control knob
setting in (4-7) state may increase the working time of compressor.
5.Disgusting odour happens
Food with strong odour should be packed tightly before being put inside
the appliance. Please check whether there is any deteriorated item or
whether the liners are left dirty for a long time.
6.Water leaks from the bottom of the refrigerator
The drain tube is jammed. Please use a proper tool to solve it.
The follow cases are not malfunction
1.Moisture may form dew on the outside of the product during the
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
6.DISPOSAL:Do not dispose this product as
unsorted municipal waste.Collection of
such wasteseparately for special
treatment is necessary.
Summary of Contents for Marine BCD-215V
Page 6: ......
Page 7: ......
Page 11: ...Wiring diagram...
Page 12: ...Installation drawing 134 70...