18.9.2007
Rev. 2.4
Use instructions
5
Check that the scraper is turning in the clockwise direction.
4.2
After use
4.2.1
Cleaning
Unplug the power cable from the socket, before you start cleaning operations.
For cleaning operations from surfaces, including subsequent ones, use an ordinary deter-
gent for washing dishes or a solution of water and 10 % of vinegar. It´s recommended not
to use abrasive detergents or powders, since these might damage the surfaces.
All cleaning operations must be carried out only after the power and water supply have
been disconnected as described previously.
For cleaning operations from inside and disinfection of the appliance must be carried out
by professionally qualified and authorized staff.
