2.11.2005
Rev. 1.5
Operation instructions
23
4.2.10
Automatic cooling
Cooling is based on cold tap water circulating in the kettle's steam jacket. Mixing and use
of scrapers make the cooling more efficient. The cooling time depends, for example, on
the product and the amount to be cooled, the product's initial and end temperature, the
flow rate and temperature of the cooling water, as well as mixing operations.
Starting the cooling
Press once.
Select the target temperature for the product being cooled.
Wait three seconds until 'no' is displayed. With the central dial, select 'YeS' on the display.
Start the cooling by pressing once.
‘Set’ is blinking on the display to remind you that mixing makes the cooling much more
effective. Choose a mixing operation suitable for the product and the load.
If 'no' remains on the display for 10 seconds, i.e. the 'YeS' selection is not made, the cool-
ing function is cancelled. If you, however, want to start cooling, activate the function by
starting from the beginning.
Changing the target temperature during cooling
Press once.
Select a new target temperature (on the display: food temperature).
Cooling continues automatically until the new temperature has been reached.
Continuing the cooling to a lower temperature
When food temperature reaches the temperature set, the flow of cooling water stops, ‘rdy’
blinks on the display and the buzzes sounds. The mixer continues rotating if this function
has been selected.
Press once (buzzer stops sounding).
Select a new target temperature (on the display: food temperature).
The new target temperature is reached, 'rdy' is again blinking on the display and the buzzer
sounds.
Maintaining the cooling temperature (‘Hold’)
The Proveno kettle can maintain the temperature reached.
Press once (buzzer stops sounding).
Food temperature is blinking on the display, but now a new temperature selection is not
made.
Summary of Contents for PROVENO S 100
