Metra Electronics 95-7309, Installation Instructions Manual

Kit Assembly 95-7309

Stacked ISO DIN head unit provision

1.

  Slide the appropriate bracket into the 

trim plate aligning the holes in the trim 

plate to the clips on the bracket.   

(Figure A)

2.

  Slide the stacked ISO DIN units into the 

trim plate bracket assembly and secure 

the unit to the kit using the screws 

supplied with the head unit.  (Figure B)

3.

  Locate the factory wiring harness in the  

dash. Metra recommends using the  

proper mating adapter from Metra or  

AXXESS. Re-connect the negative    

battery terminal and test the unit for  

proper operation. 

4.

  Reassemble dash in reverse order  

of disassembly.

(Figure A)

(Figure B)

Note: 

•  For the Hyundai Sonata 1991-2001, 

Hyundai Tiburon 1997-2002, and the 

Hyundai Santa Fe 2001-2006 vehicles 

you will need to attach the provided 

thick spacers

 to the double DIN 

brackets.  (Figure A)

•  For the Hyundai Elantra 1996-2000 

vehicles you will need to attach the 

provided 

thin spacers

 to the DDIN 

brackets.  (Figure B)

•  Spacers will need to be removed from 

shipping bar.