Metra Electronics 95-7362B Installation Instructions Manual Download

Page: 3 / 8

95-7362B

Kit Assembly

(Figure A)

(Figure B)

ISO DDIN radio provision
1.

Attach the brackets to the radio

with the screws included with

radio. (Figure A)

Locate the factory wiring harness

and antenna plug in the dash.

Metra recommends using the

proper mating adapters from Metra

and/or AXXESS.

Mount the assembly into the sub

dash. (Figure B).

Reassemble the dash in the

reverse order of disassembly using

the 99-7362B trim panel instead of

the factory panel. (Figure B)

Summary of Contents for 95-7362B

Page 2: ...er console Figure A 2 Remove 4 Phillips screws from radio trim panel Gently pry radio trim panel from dash Figure B 3 Remove 4 Phillips screws securing radio chassis to sub dash Figure C Continue to kit assembly Dash Disassembly Figure A Figure B Figure C ...

Page 3: ... radio Figure A 2 Locate the factory wiring harness and antenna plug in the dash Metra recommends using the proper mating adapters from Metra and or AXXESS 3 Mount the assembly into the sub dash Figure B 4 Reassemble the dash in the reverse order of disassembly using the 99 7362B trim panel instead of the factory panel Figure B 3 ...

Page 6: ...os 4 tornillos Phillips del panel de la moldura del radio Quite con cuidado el panel de la moldura del radio del tablero Figura B 3 Quite los 4 tornillos Phillips que sostienen el chasís del radio al sub tablero Figura C Continúe con el ensamble del kit Desmontaje del tablero Figura A Figura B Figura C ...

Page 7: ...bique el arnés de cableado de fábrica y el conector de la antena en el tablero Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y o de AXXESS 3 Monte el ensamble en el sub tablero Figura B 4 Vuelva a armar el tablero en orden inverso al desensamble usando el panel de moldura decorativa 99 7362B en lugar del panel de fábrica Figura B 3 ...