95-7504
3
Kit Assembly
ISO DDIN radio provision
1.
Snap the
ISO DDIN brackets
to the
inside edge of the
radio housing
.
(Figure A)
2.
Slide the radio into the bracket/radio
housing assembly, and secure using
the screws supplied with the radio.
3.
Snap the
trim plate
onto the front of
the
radio housing
. (Figure B)
4.
Attach the (2)
plastic
panel clips
to
the rear of the
radio housing
.
(Figure C)
5.
Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
6.
Reassemble the dash in reverse
order of disassembly.
(Figure A)
(Figure B)
(Figure C)
