Metra Electronics 99-4503 Installation Instructions Manual Download

Page: 1 / 8

INSTALLATION INSTRUCTIONS FOR PART 99-4503

99-4503

APPLICATIONS

GENERAL MOTORS 1982-02

VEHICLES EQUIPPED WITH J-2000 PANEL-STYLE

FACTORY HEAD UNIT PROVISIONS

(SEE INSIDE FOR SPECIFIC APPLICATIONS)

(USE WITH 02-4544 BRACKET KIT

OR FACTORY BRACKETS)

KIT FEATURES

• Shaft and DIN Unit Provisions

• A) Radio Housing • B) Faceplate • C) Equalizer Dummy Plate • D) (4) Keps Nuts

• E) (4) Carriage Bolts

KIT COMPONENTS

Phillips Screwdriver • Adjustable Wrench • Cutting Tool

1-800-221-0932

www.metraonline.com

TOOLS REQUIRED:

Summary of Contents for 99-4503

Page 1: ...SPECIFIC APPLICATIONS USE WITH 02 4544 BRACKET KIT OR FACTORY BRACKETS KIT FEATURES Shaft and DIN Unit Provisions A Radio Housing B Faceplate C Equalizer Dummy Plate D 4 Keps Nuts E 4 Carriage Bolts KIT COMPONENTS Phillips Screwdriver Adjustable Wrench Cutting Tool 1 800 221 0932 COPYRIGHT 2001 2008 METRA ELECTRONICS CORPORATION www metraonline com TOOLS REQUIRED C D E A B ...

Page 4: ...RATION ALL VEHICLES Please call Metra s Technical Support line for individual dash disassemblies Mount the Metra bracket s OR factory mounting bracket s to the Radio Housing with Carriage Bolts and Keps Nuts supplied 1 ...

Page 5: ...aft nuts See Fig A DIN HEAD UNITS Cut and remove the shaft supports from the Faceplate Snap the converted Faceplate onto the front of the Radio Housing Slide the DIN cage into the kit and secure by bending the metal locking tabs down Slide the aftermarket head unit into the cage until secure See Fig B 99 4503 KIT ASSEMBL Y FINAL ASSEMBL Y ...

Page 7: ...VEHICLES 99 4503 KIT ASSEMBL Y FINAL ASSEMBL Y 4 Re connect the battery terminal and test the unit for proper operation Mount the head unit kit assembly to the sub dash with those screws previously removed ...