Metra Electronics Saddle Tramp BC-BTHBSP Installation Instructions Manual Download

Page: 3 / 8

REV. 08/20/2019 INSTBC-BTHBS

INSTALLATION

3 amp fuse

(

Figure B

)

Wire Connections

Red Wire

• It is recommended to connect this wire to the ve12v

accessory or ignition circuit.

Black Wire

• It is recommended the this connect this wire to the chassis

ground or the - negative terminal of the vehicles battery.

Blue Wire

• FM Antenna needs to be routed away from any metal.
Poor reception may result if blocked by a metal objects.

USB Plug

• Route the USB into a secure and protected location as it is not
weather resistant.

Summary of Contents for Saddle Tramp BC-BTHBSP

Page 3: ...ry or ignition circuit Black Wire It is recommended the this connect this wire to the chassis ground or the negative terminal of the vehicles battery Blue Wire FM Antenna needs to be routed away from any metal Poor reception may result if blocked by a metal objects USB Plug Route the USB into a secure and protected location as it is not weather resistant ...

Page 5: ...ce the volume BT USB mode A short press of VOL key will select the previous song A long press of VOL key will reduce the volume Next Volume up VOL FM Mode A short press of VOL seeks up to the next available channel A long press of VOL key will increase the volume BT USB Mode A short press of VOL key will select the next song A long press of VOL key will increase the volume ...

Page 6: ...device search for BC BTHBS and select The password for pairing is 0000 after the pairing is successful the BT BTHBS will announce DEVICE IS CONNECTED you are now ready to stream music If at anytime the Bluetooth connection is terminated the BC BTHBS will announce DEVICE IS DISCONNECTED Note Some phones will automatically connect not needing to enter the password ...

Page 7: ... 10 7 MHz SNR 40dB Noise sensitivity 37dB MEDIA PLAYER SNR 40dB Channel isolation at 1 KHz 23dB Harmonic distortion at 1 KHz 5 Frequency response l00Hz l0KHz 6dB Power amplifier Output Speaker output Speaker impedance 4 8Ω Maximum active output power 15Wx2 Maximum output power 20Wx2 Power supply DC12V ...