20
4.4. Tests
• Pressure Decay Test - PDT
The pressure decay test gives you the possibility to follow up and log the legaly imposed pres-
sure test. There is the possibility to automatically compensate the pressure for temperature
variations. A temperature and pressure sensor are what you need for this test.
2. Select ‘Pressure Decay Test’.
3. Complete the Pressure Decay Test Setup.
You must assign a pressure sensor
You are free to choose to assign a:
- System Temperature sensor
- Ambient Temperature sensor
- Target Pressure
- Pressure Medium (N2 or N2H2)
1. Select ‘Main Menu’ and select ‘Tests’.
4. Press ‘Start’
You get the Pressure Decay Test Status
5. End the PDT by pressing ‘Stop’.
You get the report.
6. Consulting the PDT:
- on the handheld can be done similarly as
a Measurement Report.
(See 4.3 - Measurement Report)
- on the PC can be done similarly as a
Measurement Report & Logfile.
(See 4.5 - Follow-up on PC)
Main Menu
