7
When your sensor has endured an overpressure of more than 2 times the max. pressure, you have
to recalibrate your sensor. (see 5. Service & Support, Calibration and Updates)
Handheld
Sensors
ON
OFF
1 Back
2 All Sensors
3 Main Menu
4 Logging
: Swipe to the right (->) 1-2-3-4 (min 1 s)
: Swipe to the left (<-) over 4-3-2-1
: back to preceding menu item
: to ‘All Sensors’
: to ‘Main Menu’
: start/stop logging
1
4
3
2
Touchscreen
Shortcuts
Power sockets
USB socket
Power sockets
ON
OFF
Calibration
Locate
Red LED
Green LED
: Push the button while the red LED flashes (2 s).
Flashing slows down once activated.
: Push the button for at least 2 s while the red LED
flashes quickly. Flashing stops when the sensor is Off.
: Calibration (see 5.2 Calibration)
: Locate the sensor when assigning placement to sys-
tem (see ‘Step 10’ in 4.1 ACR System Management)
: ON/OFF & Data sending
: Calibration (see 5.2 Calibration)
ON / OFF
Calibration
&
Locate
