MD 126 Detector
Safety
5
2.
Safety
•
Respect the safety rules indicated in the user
manual.
•
Read understand and follow safety rules and
operating instructions in the manual before using
this tester.
•
The tester’s safety features may not protect the
user if not used in accordance with the
manufacturer’s instructions.
•
Check on a known live source within the rated AC
voltage range of the tester before use to ensure it
is in working order.
•
Insulation type and thickness, distance from the
voltage source, shielded wires, and other factors
may effect reliable operation. Use other methods
to verify live voltage, if there is any uncertainty.
•
Do not use if the tester appears damaged or if it
is not operating properly. If in doubt, replace the
tester.
•
Do not use on voltages that are higher than as
marked on the tester.
•
Use caution with voltages above 30 volts AC as a
shock hazard may exist.
•
Comply with all applicable safety codes. Use
approved personal protective equipment when
working near live electrical circuits-particularly
with regard to arc-flash potential.
•
Do not operate tester if Low Battery warning
occurs. Replace batteries immediately.
Safety symbols
Potential danger. The user should
refer to the manual for important
safety information.
Dangerous voltages may be present.
The equipment is protected by double
or reinforced insulation
