MetriCorr
Slimline series
–
ICL-C & MasterLink Operation Manual
11 | 54
The 'Received Time' should be approximately that of when the unit was powered up. Status should be 'OK.'
After the unit has started communication (refer to" Figure 4. LED flash indication" flash pattern, 3rd row), it
could take a few moments for the WebService to update. Refresh your browser page if it does not appear
within 1 minute.
Should the unit not display on the MasterLink page, restart the unit to force new communication.
3.2.1
Setup of ICL-C & MasterLink
On the setup page in WEBService, the user shall specify the interval between measurements or a schedule
for a weekly" Intensive mode" campaign.
On the" Your defined Masterlink" page, see
Figure 5, you can access the setup page for the current ICL-C & MasterLink:
Click'
Setup'
in the column to the right:
