MetriCorr
Slimline series
–
ICL-C & MasterLink Operation Manual
46 | 54
The red LED indicates the power status of the
satellite modem. The red LED is located on
the front of the modem.
When the relay is switched on (green LED),
the built-in supercapacitor in the modem
must be charged before it is able to operate,
which will take up to 30 seconds. The red LED
on the modem will light up when it is ready to
operate. When the relay is switched off, the modem will stay on (indicated by the red LED) for a while until
the super capacitor has been discharged.
7.3
Webservice Subscription
In WEBservice, the
subscription for satellite communication is called “Satellite”, which includes data
transfer of one measurement per day. In
WEBservice, press “RMU”
-
> “Masterlinks” in the top menu as
shown below:
Your satellite-connected MasterLink will appear in the
“Your defined Masterlinks” list
as any other
MasterLink-
datalogger from Metricorr. Here, the “Subscription Category” is set to “Satellite”.
