MetriCorr
VL100 & MasterLink Operation Manual
10 | 45
3.2
WebService - general
using the username and password sent to you as per Section 1. For
data safety, it is recommended that your assigned password should be changed on your first login. This can
be done in the '
Profile
' menu. You should also '
Logout
' when you have completed your session.
Click on “DATA” in the top menu and press on “POT –
Potential”. The landing page is shown below:
In webservice, the VL100 module needs a “Sensor”
to store the measured data.
By default, webservice creates a sensor with the title
“P
-
“ followed by the same
serial number as for the
VL100
module. I.e. “P
-AN02792688
”.
It is possible to create more sensors in webservice, where each of them holds data. I.e. this is useful, if you
have installed several physical sensors (voltage measurement points) down a pipeline and you want to
collect data manually using a VL100 as a handheld instrument and MetriCorr’s “Logger app”.