MetriCorr
VL100 & MasterLink Operation Manual
4 | 45
1
Scope
This document is a guideline for setup and operation of the datalogger model
”VL100
& MasterLink
”
from
MetriCorr’s
Slimline series of remote monitoring equipment. The VL100 datalogger has two terminals
“Pipe” and “Ref” for voltage measurements. Hereafter referred to as “unit”.
The VL100 datalogger can be ordered with several options:
1.
COM port (required for satellite connection, see section 6.)
2.
Ethernet port
3.
Compact housing
4.
Lithium battery
The MetriCorr remote monitoring system uses an online WebService, where all the data from site are
uploaded and stored. The unit consists of a MasterLink module and an ICL-C module, where both modules
are configured and controlled from WebService.
Before you start:
•
If you want to link your new unit to an existing MetriCorr WebService account, please email
with the following information:
-
Account Name
(existing or new) you wish the unit(s) to be assigned to.
-
User email address
(for new users to log in to existing or new accounts
)
-
MasterLink Serial Number(s)
you wish to link to the account
•
If you are a new customer or setting up a
NEW account,
please also provide details of a Primary
contact person
for data & administration communication with MetriCorr.
1.
Name & title / position
2.
Email address
3.
Telephone number
Once you have confirmation that the units have been assigned to the account as requested (together with
login details if you have requested a new account or user), you are ready to start.
IMPORTANT: Do not disassemble the unit. If the unit is malfunctioning, please contact MetriCorr.
