MX 20
30
R A N G I N G
R A N G I N G
R A N G I N G
R A N G I N G
R A N G I N G
· In voltage and resistance measurements, the multimeter normally
operates in automatic ranging mode; an audible signal is heard
every time the range increases. Ranges can be selected manually
by pressing the MAN RANGE/AUTO RANGE key.
· Pressing the key once fixes the current range (manual mode).
Each brief touch of the key increments the range, and if the key is
held down for more than two seconds, the multimeter returns to
automatic ranging mode.
2.3 - ACCESSORIES
2.3 - ACCESSORIES
2.3 - ACCESSORIES
2.3 - ACCESSORIES
2.3 - ACCESSORIES
Supplied with the multimeter
Supplied with the multimeter
Supplied with the multimeter
Supplied with the multimeter
Supplied with the multimeter
One set of test leads and safety prods
AG0475
Two 1.5 R6 size batteries
AL0020
One 10 A fuse, 6.3x32mm, 50kA/600V
AT0084
One 0.63 A fuse, 5 x 20 mm, fast-blow, 1.5kA/250V
AT0047
One Instruction Manual
IM0822
Optional
Optional
Optional
Optional
Optional
Probes
:
HT0203
EHT 3 kV AC/DC
HT0212
EHT 30 kV DC
HT0208
RF 100 kHz to 750 MHz
HA0902
TV (HT transient suppressor)
HA1159
Thermometer, 1 mV/°C, -50°C to +150°C
HK0210
Type K thermocouple, 1mV/°C, general purpose
and surface type, -25°C to + 350°C.
HA1237
Optical tachometer, 100 rpm to 60000 rpm
