How are the various quantities measured?
22
Benchtop multimeters, 6000 and 60000 points
How are the various quantities measured? (continued)
9. Measurement on an
MLI type speed
variator
Voltage measurement
1. Set the switch to
.
2. Select the filter by pressing
.
3. Connect the black lead to the “COM” terminal and the red lead to “
+
”.
4. Place the test probes between two phases of the circuit to be measured:
5. Read the measurement values indicated on the display unit (voltage and
frequency):
“
O.L
” is displayed above 1050V and a beep sounds when the
measurement exceeds 600V.
The presence of the symbol indicates that the filter is active.
Remark: It is very important to leave the filter activated to measure the
voltage and frequency of the signal without being perturbed by
the MLI.
