Chapter II
Portable digital multimeter
27
5.
TECHNICAL
SPECIFICATIONS
Only those values assigned tolerances or limits are guaranteed values. Values without
tolerances are given for information only (French standard NFC 42670).
The technical specifications are guaranteed only after 30 min warm-up period. Except special
indication, they are valid from 5 to 100 % of the range of measurement.
{Accuracy : ‘’n%R + nD’’ means ‘’n% of the r n digits’’ as per IEC 485}
5.1. DC
voltages
Selector
switch
position
Ranges
Accuracy
Input
impedance
Protection Resolution
mV
500 mV
10 M
Ω
± 850 V
PK
∗
100
µV
5 V
11 M
Ω
1 mV
50 V
0.1% R + 2D
10 mV
500 V
0.2% R + 2D
100 mV
V
DC
600 V
0.3% R + 2D
10 M
Ω
± 850 V
PK
1 V
∗
1 mn max
Number of count :
5000
Range selection :
automatic or manual for the 5V, 50V, 500V, 600V
ranges
Common mode rejection :
at 50 and 60 Hz, better than 120 dB
Serial mode rejection :
at 50 and 60 Hz, better than 60 dB
Additional error in Pk +/- mode for a pulse of
≥
1 ms: 1% R
±
50 D
For measurements performed on alternative signals, the selected range must tally with the max.
value of the signal peak.
5.2.
AC voltages (AC and AC+DC)
Accuracy
DC
∗
40Hz
∗∗
to 200Hz
200 to
4 kHz
4 to
10 kHz
10 to
30 kHz
30 to
50 kHz
Selector
switch
position
Ranges
5 to 100 % of range
Input
impedance
Protec-
tion
REso-
lution
mV
500 mV
∗
3 %
typ.
10 %
typ.
∗∗∗
//////////// 10 M
Ω
/1G
Ω
// 100 pF
∗∗
±
850V
PK
100 µV
5 V
11 M
Ω
// 100 pF
1 mV
50 V
10 mV
500 V
1,5% R
+ 3 UR
2 % R + 3 D
3 % R
+ 3 D
100 mV
V
AC
or
V
DC
+
SEL/ON
600 V
∗∗∗∗∗
1 % R + 3 D
1,5 % R +
3 D
∗∗∗∗
//////////////// /////////////
10 M
Ω
// 100 pF
±
850V
PK
1 V
∗
AC + DC only
∗∗
20 Hz to 40 Hz = 1,5 %
∗∗∗το
20 kHz
∗∗∗∗
up to 1 kHz
∗∗∗∗∗
applicable max. voltage : 600 V
RMS
CAT IV
Max. Frequency = 15 000 [V
∗
kHz] / Input [V]
Number of count :
5000
Range selection :
automatic or manual for the 5V, 50V, 500V, 600V
∗
ranges
Common mode rejection :
at 50 and 60 Hz, better than 80 dB
Additional error according to crest factor :
0 % for a crest factor < 1.5
1 % for a crest factor of 1.5 to 2
4 % for a crest factor of 2 to 3
