11
MAINTENANCE & REPLACEMENT PARTS LISTS
Cleaning Instructions
Use 70 percent isopropyl alcohol (IPA) diluted with water for cleaning power supply. You may also use one of these
products to clean the power supply:
•
Cidex
•
Clorox Clean-Up
• “Green soap” United States Pharmacopoeia (USP)
•
Formula 409
•
Sani-Cloth. Plus
• Virustat TBQ
NOTE
: Do not use these products on the All-in-one computer/monitor.
Ensure that power supply is off and unplugged. Apply 70 percent isopropyl alcohol to a clean nonabrasive cloth and then
wipe the power supply enclosure. Cleaners applied directly to the power supply enclosure could leak inside and cause
damage. Be careful not to splash solvents on power supply enclosure.
Disassembly of Power Supply from Cart
WARNING
: Before disassembly power cord must be disconnected from the wall outlet.
NOTE
: Disconnect all wire harness and electrical cords from power supply.
POWER SUPPLY KIT (40lbs.) IS HEAVY
DO NOT LIFT OR CARRY POWER SUPPLY WITH
BARE HANDS.
CARRY OR MOVE POWER SUPPLY ON LIFTING
EQUIPMENT.
B
Slide/Remove Power
Supply in this Direction
A
Summary of Contents for STARSYS WIRELESS
Page 15: ...15 WIRING DIAGRAM ...
