Metro DataVac STARSYS WIRELESS, Instructions For Use Manual

5

5. 

At each connector, firmly grip the cable plug between thumb and index finger.  Line up the plug with the socket below 

it and insert it downward all the way until the latch locks completely.  The latch should click into place as shown in 

Figure 6.

F

igure

 6:  C

able

 P

lug

anD

 s

oCket

NOTE

:  Instructions for disconnecting the batteries are also printed on a label inside the Battery Connector Access Panel.

6.  Check that all connections have been made and properly seated with latches locked.  There are up to of 8 battery 

pack connectors in an Li-Nano power supply as shown in Figure 7.

F

igure

 7:  P

roPerly

 s

eateD

 C

onneCtions

7. 

Rotate the Battery Connector Access Panel back up, pushing until the top is firmly seated against the case as shown 

in Figure 8.  Re-install the screws on sides of power supply that hold the Battery Connector Access Panel.

F

igure

 8:  b

attery

 C

onneCtor

 a

CCess

 P

anel

 - C

lose

LINE UP CABLE PLUG WITH SOCKET

PRESS CABLE PLUG FIRMLY INTO SOCKET 

UNTIL CLIP LOCKS

PROPERLY SEATED CONNECTION