Operating Instruction
1. Switch your scooter off with the key switch.
1. Swivel the charge connector cover on the tiller and
plug in.
2. Connect the other end with the battery.
3. Start to charge for the scooter.
Caution
Before using the battery charger, please read all the instructions carefully.
Please do not charge for the scooter outdoors, in confined space, or under the environment of high
temperature, flammability gas, oil fog and vapor. Please do not place the charger in the seat cask or
trunk when charging.
Ensure the scooter is switched off before charging.
Ensure that the charger plug is dry and intact before connecting with scooter.
After charging, please remember to swivel back the charging cover to avoid dampening.
The charger must be kept dry in the environment between -25°C and 40°C.
Use only the original charger from our company. Other brand charger may shorten your warranty
period, and unknown charger may cause damage and injury.
In all cases, the charger must only be repaired by an authorized dealer.
Tip
If some failure occurs, the reset button will pop out. Switch the scooter
off, press the button in and switch on the scooter again.
If your scooter fails to respond to normal control after a charging period,
please check whether the battery charger has been completely
disconnected from the scooter.