6
Installation Guide
2
Installation Guide
Follow the simple steps outlined in this section of the guide to install and start
using your Metrobility 2131 media converter.
Unpack the “twister” Media Converter and Accessories
Check that the following components have been included with your order:
• 2131 media converter
• Power supply
• Power cord
• Four (4) rubber feet
Your order has been provided with the safest possible packaging, but
shipping damage does occasionally occur. Inspect your order carefully. If
you discover any shipping damage, notify the carrier and follow their
instructions for damage and claims. Save the original shipping carton if
return or storage of the unit is necessary.
Choose an Appropriate Location
The 2131 media converter is intended for use in either office or industrial
environments. The unit must be located within six (6) feet of the AC power
source being used and placed as far away as possible from electrical noise
generating equipment such as copiers, electrostatic printers and other
motorized equipment. If exposed twisted-pair wiring is used nearby, the
wiring should be routed as far away as possible from power cords and data
cables to minimize interference.
The units may be oriented in any manner which permits you to make
physical connection to the power supply and leaves a minimum of six (6)
inches of space for proper ventilation.
TUV Compliance Note: For pluggable equipment, the socket outlet must be
installed near the equipment and be easily accessible.
Bei Geräten mit Steckanschluß muß die Steckdose nahe dem Gerät
angebracht und leicht zugänglich sein.
1
