■■■■■■■■■■■■■■■■■■■■■■
6 Maintenance
■■■■■■■■
41
2
If the scTRACE Gold should be used again later, put the protective
cap back on the electrode to avoid damage to the gold micro-wire.
3
Hold the scTRACE Gold left and right on the splash protection as indi-
cated with the green marks in
4
Pull the electrode straight off the electrode holder.
CAUTION
Take care not to twist the electrode while pulling it off. Tilting the elec-
trode may damage the contact springs of the electrode holder or the
electrode itself.
6.2
Removing the screen-printed electrode
NOTICE
Screen-printed electrodes can only be used for a limited number of
measurements and have to be replaced in regular intervals. The lifetime
and the frequency of replacement depend on the type of electrode and
the application. Details can be found in the respective application docu-
mentation.
Figure 14
Remove screen-printed electrode
Summary of Contents for 2.946.0010
