■■■■■■■■■■■■■■■■■■■■■■
5 Operation
■■■■■■■■
31
The determination will automatically be recalculated with the new
settings.
Adapting the base points for an individual curve
1
On the workplace, go to the subwindow
Results
and select the tab
with the name of the substance for which the base point(s) should
be adapted.
2
In the column
Manual base points
, activate the check box for the
curve for which the base point(s) should be adapted.
3
Type in the new values for the base points in the column
Start base
point
and/or
End base point
.
4
Click on or
Menu bar
▶
File
▶
Reprocess
to reprocess the eval-
uation and calculation with the new settings for the base point(s).
Adapting the settings for the standard addition
NOTICE
The number of additions cannot be adapted subsequently. However,
curves can be excluded from the evaluation as described above
"Excluding a curve from the evaluation", page 30)
.
1
Click on or
Menu bar
▶
Method
▶
Edit method parame-
ters…
.
2
In the dialog window
Method parameters
, go to the tab
Evalua-
tion
.
3
To adapt the concentration of the standard solution go to the section
Standard solutions
. Adapt concentration and/or concentration unit
of the substance in the standard solution as required.
Summary of Contents for 2.946.0010
