■■■■■■■■■■■■■■■■■■■■■■
Maintenance
■■■■■■■■
23
NOTICE
If the suspicion arises that liquids have found their way into the
product, disconnect the product from the power grid and con-
tact your Metrohm Service.
NOTICE
Water or ethanol can be used as a cleaning medium.
NOTICE
The connectors at the rear of the product must only be cleaned
with a dry cloth.
7.4
OMNIS Rod Stirrer – Cleaning
The stirring propeller must be cleaned if it exhibits visible adhesions.
Cleaning the stirring propeller
Proceed as follows:
1
Use water from a wash bottle to rinse off the adhesions.
2
Loosen stubborn contaminations by applying a small amount of suit-
able solvent. Remove them afterwards with a soft cloth or a brush.
If the contaminations cannot be removed, replace the stirring propel-
ler.
The rod stirrer housing must be cleaned if it is contaminated.